Easy Steps to Install Landscape Drains



0 Comment

Is your home lawn pooled with rainwater? Are you struggling to keep your yard dry and free from moss? You might want to install landscape drains from Landscaping Madison WI to maintain the beauty of your façade.

The lower surfaces in your home lawn and the structures of a sloping base can result in water accumulation and may even collect algae, giving your landscape an odd appearance. The foundation of the house might be damaged by pooling water as it triggers the growth of weeds, fungus, and moss. These might even kill your plants.

Thus, installing a lawn drain can improve your landscape by providing the rainwater access to flow underground. Here are steps for installing landscape drains.

  • Locate the Slope Areas in Your Yard

The lowest areas in your yard are the flood-prone zone. You should locate these areas and put or draw a straight line directed uphill with the use of wooden stakes. Measure the drawn line from the nearest possible drainage ditch (or it could also be directed towards a sloping area) to the stakes.

Then, put a mark on the path of the draining line with the use of wooden stakes. If you are planning to drain an area that is next to a wall foundation, just make sure that your measurements will extend far beyond enough to the wall edge to carry the amount of water away from the house.

  • Buy enough PVC

You need to buy enough PVC pipe and fabric Landscaping to span the drainage ditch length you had just marked out. Also, purchase an ample amount of coarse gravel that measures between three-fourths and one inch to fill half of your trench.

  • Shallowly Dig a Ditch

Dig a ditch that measures approximately twenty-four inches deep and twelve inches wide, starting at the very first area you had marked. Make the ditch as straight as you possibly could and throw away any buried objects that obstruct the ditch path.

Next, increase the ditch depth by one inch for every ten feet to allow smooth water flow. With this, the water would naturally flow away from your landscape’s low spot.

  • Line the Sides and Bottom of the Ditch

The next step is to line the sides and bottom of the ditch using a landscape fabric. Put the perforated PVC into the ditch and merge each section with the use of pipe connectors. Then, rotate these pipes until the perforated holes face down.

  • Fill the trench

Fill the trench with gravel until the gravel top measures six inches under the ground. Hold the landscape fabric in place, positioning it against the trench’s sides until it is almost filled with gravel. When the gravel is already in place, you should fold each side of the landscape fabric over the gravel’s top and secure the sides in place with the use of Landscaping staples.

  • Shove the Soil Back to its Place

Shovel the soil that you removed from your ditch over the gravel’s layer until the soil will be leveled with the ground that surrounds the trench. Next, you have to sow some grass seed over your trench to make a ground cover layer that can stop the soil on top of your drain from being eroded.

Conclusion

This are the steps to easily install landscape drains on your house lawn. Do you find these steps useful so you can say goodbye to stagnant rainwater and protect your yard.

Leave a Reply

Your email address will not be published. Required fields are marked *